Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Instrument cluster

See other generations:
Video tutorial

How do you remove the instrument cluster on a Chevrolet Captiva? Follow these steps for disassembly: use a screwdriver to unscrew the screws located in the plastic trim of the steering wheel and remove the frame from the instrument cluster. Unscrew the retaining screws of the instrument cluster; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster.

Fit a new piece or replace the LEDs/bulbs in the cluster and reassemble it. Finally, reverse the assembly steps.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

What Does the Oil Light with a Spanner Indicate on the Chevrolet Captiva?
What Does the Oil Light with a Spanner Indicate on the Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) If the oil light with a spanner has illuminated on the instrument cluster of your Chevrolet Captiva, it means it's time to have a service at your tru…
How to Reset the Service on a Chevrolet Captiva
How to Reset the Service on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Resetting the service on a Chevrolet Captiva is a fairly simple operation. Start by turning on the instrument cluster without starting the vehicle's …
How to Reset the Service Light on a Chevrolet Captiva
How to Reset the Service Light on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) To reset the Service light on a Chevrolet Captiva, enter the cabin and press the accelerator pedal while the instrument cluster is off. While holding…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos