Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tire pressure warning light on the Chevrolet Cruze

Model: Chevrolet Cruze D2lc, D2lc-K - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

In a few simple steps, we will see how to reset the TPMS sensors of the Chevrolet Cruze; before resetting the warning light, it is necessary for all four tires to be at the correct pressure. So, get into the car and start the engine; use the steering wheel controls to access the car settings, until you reach the tire pressure monitor screen, as shown in the video.

At this point, hold down the central button (the button between the arrows) to confirm and perform the recalibration of the tire pressure sensors!


Posted on 17 June 2025 by ScegliAuto


Related tutorials

How to Remove the Radio from a Chevrolet Cruze
How to Remove the Radio from a Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) If the factory radio in your Chevrolet Cruze is faulty and you want to replace it with a new one, read this guide and follow the steps to easily remo…
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…
How to Remove the Coolant Reservoir on a Chevrolet Cruze
How to Remove the Coolant Reservoir on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Before starting, open the bonnet of your Chevrolet Cruze. Begin by disconnecting the positive terminal of the battery, allowing you to work safely. N…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos