Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Switch on a Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Door lock

How to remove the ignition switch on a Chevrolet Aveo? Follow these steps: before removing the ignition switch, disconnect the battery power cables. After unscrewing the fastening screws of the side and lower cover of the steering wheel (using a socket or screwdriver): remove the fastening pin of the ignition switch from the side (as shown in the video). Once the lock is removed, replace it with a new one and refit all the previously removed parts (work in reverse order during reassembly).

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Chevrolet Aveo?
How do you program the key of the Chevrolet Aveo?
Chevrolet Aveo (2012-2020 / T300, MK 2) To program the key of the Chevrolet Aveo, you need to insert the blank key into the corresponding ignition block: then you will need to connect a dia…
Where is the Fuse Box Located on the Chevrolet Aveo?
Where is the Fuse Box Located on the Chevrolet Aveo?
Chevrolet Aveo (2002-2011 / MK 1, T200) This video shows the location of the fuse boxes in the Chevrolet Aveo and their corresponding diagrams, useful if you need to check the fuse for a ma…
Replacing the Spark Plugs on Aveo
Replacing the Spark Plugs on Aveo
Chevrolet Aveo (2002-2011 / MK 1, T200) Replace the damaged spark plugs on the Chevrolet Aveo. Here's how to remove them from the engine head. Lift the front bonnet and secure it. Remove th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos