Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Steering Angle Sensor on the Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

Today, we will go through the instructions to remove and replace the steering angle sensor on the Chevrolet Cruze. First, open the car's bonnet and disconnect the battery; then, remove the steering wheel airbag by disconnecting the electrical connector at the back.

At this point, unscrew the central bolt of the steering wheel to remove it, disconnecting the wiring for the steering controls; now you can remove the steering angle sensor by disconnecting the various connectors and replacing it with the new one!


Posted on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Radiator Temperature Sensor on a Chevrolet Cruze
Replacing the Radiator Temperature Sensor on a Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) Let's look at replacing the radiator temperature sensor on a Chevrolet Cruze. Lift the front engine bonnet; to remove the temperature valve, you need…
Where is the Coolant Temperature Sensor Located in the Chevrolet Cruze?
Where is the Coolant Temperature Sensor Located in the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) In this video, you can see where the coolant temperature sensor is located in the Chevrolet Cruze, useful if you need to replace it due to a fault. A…
How to Remove the Radio from a Chevrolet Cruze
How to Remove the Radio from a Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) If the factory radio in your Chevrolet Cruze is faulty and you want to replace it with a new one, read this guide and follow the steps to easily remo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos