Do it yourself
Frequently asked questions about cars and motorcycles

Removing Steering Wheel Controls on Chevrolet Cruze

Model: Chevrolet Cruze - Years 2000-2010
Part: Push button

This video shows how to remove the controls on the steering wheel of a first-generation Chevrolet Cruze. First, open the bonnet and disconnect the battery. Then, get inside the vehicle and use a sharp screwdriver to push on the hole behind the steering wheel to remove the airbag, disconnecting its electrical connector. Next, remove the controls on the steering wheel by gently prying on the sides to take off the plastic trim with something thin, and disconnect the electrical connector.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Cruze (2009-2015 / MK 1, J300) Today, we will go through the instructions to remove and replace the steering angle sensor on the Chevrolet Cruze. First, open the car's bonnet and d…
Chevrolet Cruze (2009-2015 / MK 1, J300) Is the starter motor on your Chevrolet Cruze not working anymore? Let's look at how to remove the starter motor on a Cruze. Open and lift the front b…
Chevrolet Cruze (2009-2015 / MK 1, J300) Do you want to replace the airbag in your Chevrolet Cruze? Here’s how to remove the airbag from the steering wheel. Disconnect the battery terminals.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos