Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Key Fob and Replace the Battery on a Chevrolet Cruze

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

See other generations:
Video tutorial

In this video tutorial, you will learn how to dismantle the key fob and replace the battery on a Chevrolet Cruze, as well as on other models like the Spark or Camaro. First, take your key fob and remove the key inside by pressing the button; then, take something very thin and pointed to lever the sides of the fob open into two parts, as illustrated in the video.

At this point, you will have access to the circuit board and the battery; simply remove it and replace it with a new one (in this case, a CR 2032 3V)!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How to Replace the Key Fob Battery for the Chevrolet Cruze
How to Replace the Key Fob Battery for the Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) The information illustrated below will allow you to remove and replace the battery of the key fob for the Chevrolet Cruze. First, take your key fob a…
How to Replace the Remote Battery on Chevrolet Cruze
How to Replace the Remote Battery on Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) To replace the battery inside the remote of your first-generation Chevrolet Cruze, you will need a new CR2032 battery and a small flathead screwdrive…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos