Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Instrument cluster

See other generations:
Video tutorial

To remove the instrument cluster from a Chevrolet Cruze, first disconnect the steering wheel by removing the central airbag. This can be done by unscrewing the screws at the back of the steering wheel, then remove the wheel itself by unscrewing the central nut that secures it to the steering column.

Next, lift the cover at the top of the steering column to access the screws that secure the instrument cluster from below. After that, detach the plastic cover on the top of the cluster by unscrewing the underlying screws.

This will allow you to slide the cluster out of its housing, disconnecting the connectors at the back.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Chevrolet Cruze
How to Remove the Radio from a Chevrolet Cruze
Chevrolet Cruze (2016-2023 / D2lc, D2lc-K) If the factory radio in your Chevrolet Cruze is faulty and you want to replace it with a new one, read this guide and follow the steps to easily remo…
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
How do you remove the door panel of the Chevrolet Cruze?
How do you remove the door panel of the Chevrolet Cruze?
Chevrolet Cruze (2009-2015 / J300, MK 1) It will be possible to remove the door panel of the Chevrolet Cruze by using a tool to pry off the inner trim of the handle housing. Then, you will n…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos