Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Chevrolet Captiva?

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Oil filter

See other generations:
Video tutorial

Replacing the oil filter on a Chevrolet Captiva is an extremely simple and quick task. First, remove the upper filler cap to release the pressure in the system.

Next, go underneath the vehicle and unscrew the drain plug using a 16 mm socket. Once all the oil has drained, move to the top of the engine and unscrew the filter housing with a 32 mm spanner.

Finally, replace the filter and its gasket, and top up with synthetic oil.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on the Chevrolet Captiva 2.4L
How to Replace the Oil Filter on the Chevrolet Captiva 2.4L
Chevrolet Captiva (2006-2018 / MK 1) These simple and brief steps will illustrate how to remove and replace the oil filter cartridge on the Chevrolet Captiva 2.4L. Along with the oil fil…
Where is the Oil Filter on a Chevrolet Captiva?
Where is the Oil Filter on a Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) In this video, you can see where the oil filter is located on a Chevrolet Captiva and how to proceed if you need to replace it. As shown, the filter …
Where is the Oil Filter Located on the Chevrolet Captiva?
Where is the Oil Filter Located on the Chevrolet Captiva?
Chevrolet Captiva (2006-2018 / MK 1) In this video, see where the oil filter is located on the Chevrolet Captiva, to be replaced if you need to perform an oil change. As shown, it is loc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos