Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb with an LED in the Chevrolet Equinox

Model: Chevrolet Equinox MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

Today, you will learn how to replace the reverse light bulb with an equivalent LED. After purchasing the correct LED bulb for your vehicle model (the type is indicated in the owner's manual), start by opening the rear compartment. Use a flathead screwdriver to remove the headlight covers and unscrew the two mounting screws.

Carefully pull out the headlight and rotate the reverse light socket a quarter turn to the left. Remove the bulb and insert the LED bulb.

Reinsert the socket and turn it a quarter turn clockwise to secure it in place. Reinstall the headlight, making sure to align the plastic clips, then insert and tighten the screws and covers.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on the Chevrolet Equinox
How to Replace the Headlight Bulbs on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) In this video, you can see how to replace the headlight bulbs, possibly with a more efficient LED model. To access the back of the headlight (startin…
How to Replace the License Plate Bulb on a Chevrolet Equinox?
How to Replace the License Plate Bulb on a Chevrolet Equinox?
Chevrolet Equinox (2010-2017 / MK 2) To replace the license plate bulb on a Chevrolet Equinox, use a lever tool to pry the light assembly above the license plate from its housing. Once r…
How to Replace the Headlight Bulb on the Chevrolet Equinox
How to Replace the Headlight Bulb on the Chevrolet Equinox
Chevrolet Equinox (2010-2017 / MK 2) To replace the headlight bulb on the Chevrolet Equinox, loosen the bolts securing the inner fender cover corresponding to the bulb being replaced. On…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos