Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs on a Chevrolet Impala

Model: Chevrolet Impala MK 10 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Spark plugs

See other generations:
Video tutorial

To replace the spark plugs on a Chevrolet Impala, open the hood to access the components inside the engine compartment. At the top, you will find the plastic cover that needs to be removed to access the underlying components.

Disconnect the ignition coil wires, removing the coils from their housing, and unscrew the spark plugs below using a socket wrench. After removing the spark plugs, install the new replacement parts along with the coils and the engine block cover.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
How to Replace the Cabin Air Filter on a 2007 Chevrolet Impala
Chevrolet Impala (2006-2016 / MK 9) To correctly and safely replace the cabin air filter in your 2007 Chevrolet Impala, read the following guide and follow the steps described. First, m…
How to Replace the Battery in the Chevrolet Impala?
How to Replace the Battery in the Chevrolet Impala?
Chevrolet Impala (2014-2020 / MK 10) To replace the battery in the Chevrolet Impala, open the hood to access the components inside the engine bay: on the right side, immediately next to …
How to Replace the Ignition Switch on a Chevrolet Impala?
How to Replace the Ignition Switch on a Chevrolet Impala?
Chevrolet Impala (2006-2016 / MK 9) To replace the ignition switch on a Chevrolet Impala, use a tool to pry off the plastic covers located on the upper and lower parts of the steering c…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos