Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Chevrolet Onix?

Model: Chevrolet Onix MK 1 - Years 2013-2022
Part: Brake pads

To replace the front brake pads on a Chevrolet Onix, lift the vehicle with a jack so that the corresponding wheel is off the ground: then unscrew its mounting bolts to completely remove it. This will give you access to the components at the back, where you will need to unscrew the bolts that secure the brake caliper, detach it, and remove the pads inside. At this point, you can insert the new pads, position the caliper over the rotor, and secure it along with the corresponding wheel.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Door Sills on a Chevrolet Onix
How to Install Door Sills on a Chevrolet Onix
Chevrolet Onix (2020-2026 / MK 2) Let's see how to install door sills on the front doors of a Chevrolet Onix. It's actually very simple. First, clean and degrease the area of the body…
How do you reset the code 35 of the Chevrolet Onix?
How do you reset the code 35 of the Chevrolet Onix?
Chevrolet Onix (2013-2022 / MK 1) When the code 35 appears on the instrument panel of the Chevrolet Onix, it means that there is a problem related to the operation of the remote contr…
What does code 82 indicate in the Chevrolet Onix?
What does code 82 indicate in the Chevrolet Onix?
Chevrolet Onix (2020-2026 / MK 2) Code 82 on a 2021 Chevrolet Onix vehicle indicates that it is necessary to replace the engine oil in the tank. After replacing the engine oil, it is …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos