Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Life on Chevrolet Trax

Model: Chevrolet Trax MK 1 - Years 2013-2022
Part: Warning light – error code

In this tutorial, you will see how to reset the maintenance light on a Chevrolet Trax. First, change the engine oil; after the DIY maintenance, get in the vehicle, insert the key, and turn on the ignition. Press the MENU button located on the control lever to the left of the steering wheel; use the arrow button to scroll through the menu until you find the oil percentage remaining. At this point, press and hold the SET button on the control lever until the reset is complete. This will restore the oil life to 100%.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Chevrolet Trax
How to reset the oil light on the Chevrolet Trax
Chevrolet Trax (2023-2026 / MK 2) Resetting the oil light, related to the engine oil change of the 2024 Chevrolet Trax, is a simple and quick operation that can be done independently.…
How to reset the oil service in the Chevrolet Trax?
How to reset the oil service in the Chevrolet Trax?
Chevrolet Trax (2013-2022 / MK 1) In this tutorial we can see how to reset the oil service in the Chevrolet Trax, an extremely simple and quick operation, to be carried out only after…
What does the "code 82" message mean in the Chevrolet Trax and how to remove it?
What does the "code 82" message mean in the Chevrolet Trax and how to remove it?
Chevrolet Trax (2013-2022 / MK 1) If the "Code 82" message appears on the dashboard of your Chevrolet Trax, it means it is time for an oil change as the relevant interval has been rea…

Other guides you may be interested in

    Frequently Asked Questions

    • Trax 2013-2022 - What does code 128 mean on the Chevrolet Trax? Read answer
    • Trax 2013-2022 - When does code 24 appear on the Chevrolet Trax? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos