Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Suburban
    4. : How to replace the pollen filter in a Chevrolet Suburban.

Chevrolet Suburban - Video tutorial

Model: Chevrolet Suburban Gmtk2yc, Gmtk2yg - Years 2015-2020
Part: Cabin air filter
Operation: How to replace the pollen filter in a Chevrolet Suburban.

In this video tutorial, we can see how it is possible to replace the cabin air filter in a Chevrolet Suburban, following a few simple steps: the first thing to do is to purchase a new cabin air filter from an authorized dealer; the next step is to get inside the vehicle, turn off the car, and engage the handbrake; the cabin air filter in this vehicle can be found behind the glove compartment on the passenger side; open the compartment, remove the clip on the right side, and disconnect the cable; now we need to press the sides of the compartment inward and lower the glove compartment completely. Use a T15 Torx to remove the securing screws on the cover; once the cover is removed, we have access to the filter housing; remove the housing cover and extract the old filter element from its seat; position the new filter following the arrows indicated on the filter itself.


Posted on 13 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos