Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : Where are the fuses located in the Chevrolet Aveo?

Chevrolet Aveo - Video tutorial

Model: Chevrolet Aveo MK 2, T300 - Years 2012-2020
Part: Fuse box
Operation: Where are the fuses located in the Chevrolet Aveo?

The fuse box of the Chevrolet Aveo in the passenger compartment is located behind the glove compartment on the left side of the steering wheel. To access the fuses, we remove the cover by opening the glove compartment, then release the glove compartment by applying slight lateral pressure to make it come down, thus reaching the fuse box. The fuse box in the engine compartment is located next to the vehicle's coolant tank. To access the fuses, we release the cover by acting on the side tabs. To replace a fuse, we locate it, grip it with small pliers, extract it, and check if the bridge inside is intact, indicating that the fuse is functioning. Otherwise, if the bridge inside is broken, the fuse needs to be replaced.


Posted on 2 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Aveo 2012-2020 - Where is the rear headlight fuse located on a 2019 Aveo? Read Answer
    • Aveo 2012-2020 - Where is the fuse for the dashboard light of the Chevrolet Aveo located? Read Answer
    • Aveo 2002-2011 - Where is the fuse for the dashboard light of the Chevrolet Aveo located? Read Answer
    • Aveo 2002-2011 - Where is the fuse for the Chevrolet Aveo's cigarette lighter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos