Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator in a Chevrolet Cruze?

Model: Chevrolet Cruze J300, MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Alternator

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the alternator in a Chevrolet Cruze, a simple task that requires good manual skills. First, ensure the engine is sufficiently cool, then open the bonnet and remove the air filter box. Next, use an E14 socket to grip the tensioner, loosen the tension, and detach the belt.

Continue by removing the tensioner itself, unscrewing the bolts securing the alternator, and disconnecting the power terminals. At this point, position the replacement part and reassemble everything by following the reverse procedure.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Change the Alternator on a Chevrolet Cruze
How to Change the Alternator on a Chevrolet Cruze
Chevrolet Cruze (2000-2010 / ) Broken alternator? Let’s look at the replacement on a Chevrolet Cruze. Lift the bonnet and secure it, locate the battery, and disconnect the terminal…
Disassemble the Key of a Chevrolet Cruze
Disassemble the Key of a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the battery of your Chevrolet Cruze key flat? Here’s how to open the key to change the battery. Open the metal key of the Cruze remote and, using …
Removing the Starter Motor on a Chevrolet Cruze
Removing the Starter Motor on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / J300, MK 1) Is the starter motor on your Chevrolet Cruze not working anymore? Let's look at how to remove the starter motor on a Cruze. Open and lift the front b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos