Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Cruze
    4. : How to change alternator on Chevrolet Cruze

Chevrolet Cruze - Video tutorial

Model: Chevrolet Cruze - Years 2000-2010
Part: Alternator
Operation: How to change alternator on Chevrolet Cruze

Broken alternator? Let's see the replacement on Chevrolet Cruze. We lift the bonnet putting it in safety, we identify the battery of the power supply and disconnect the terminals. Unscrew the air hose clamping pins, unscrew the pins with a socket wrench and disconnect the alternator belt (being careful not to damage the cable winding membranes). We unscrew all the clamping pins of the alternator. Once the disassembly is finished, take it out of the engine compartment. We take the new replacement part and insert it into the suitable housing, screw in the locking pins, then tighten the side pins of the alternator. We connect the battery terminals.


Posted on 5 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos