Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light in a Chrysler 200?

Model: Chrysler 200 MK 1 - Years 2011-2014
Part: Service warning light

In this tutorial, you will see how to reset the oil service light in a Chrysler 200. Before proceeding with this simple operation, ensure you have completed all required maintenance tasks, such as changing the oil and the oil filter. Start by inserting the key and turning on the ignition, not the engine, then within 2 seconds, press the accelerator pedal all the way down 5 times in a row. Once done, start the engine to complete the operation. To verify that the procedure was executed correctly, you can restart the ignition.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light on the Chrysler 200?
How to Reset the Oil Service Light on the Chrysler 200?
Chrysler 200 (2015-2017 / MK 2) As shown in this tutorial, resetting the oil service light on the Chrysler 200 is a very simple and quick operation. Before proceeding, make sure to …
How to reset the oil light on the 2015 Chrysler 200
How to reset the oil light on the 2015 Chrysler 200
Chrysler 200 (2015-2017 / MK 2) To successfully reset the oil light on the instrument panel of your second generation Chrysler 200 (2015 model) manually, simply follow this simple p…
How to Reset the Service Light on a Chrysler 200
How to Reset the Service Light on a Chrysler 200
Chrysler 200 (2011-2014 / MK 1) To reset the service light on a Chrysler 200, you can follow two procedures. The first method is to turn on the ignition and press the accelerator pe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos