Do it yourself
| ||||
|
Chrysler 300m - Video tutorial
Model: Chrysler 300m
- Years 1998-2004 In order to replace the radiator cooling fan, first disassemble the bonnet stringer by removing the various fixing pins and the plastic pressure locks that secure the mask; once the grille has been removed, disconnect the fan motor power socket and remove the plastic frame that supports the fans themselves (the pins in the lower part are a bit difficult to reach); in this way it is possible to extract the electric fan unit from behind the radiator after having disconnected the hose from the upper part of the radiator which otherwise prevents its extraction.
Posted on 2 August 2023 by ScegliAuto
Vacuum brake booster replacement
Chrysler 300m (1998-2004 / ) The vacuum brake booster is located in the engine compartment, on the driver's side, immediately under the windscreen, where the brake oil reservoir Other guides that may interest you
|
Fiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.140
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |