Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Vacuum Brake Servo

Model: Chrysler 300m - Years 1998-2004
Part: Brake pads

The vacuum brake servo is located in the engine bay, on the driver's side, just below the windscreen, where the brake fluid reservoir is situated. To remove it, disconnect the wiper arms, remove the plastic cover under the windscreen, and the wiper mechanism. Access the cabin to unscrew the nuts securing the brake servo near the brake pedal support and also disconnect the pedal from the brake servo actuator; once removed, attach the brake pump to the new brake servo and install it in the vehicle.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Radiator Fan
Instructions for Replacing the Radiator Fan
Chrysler 300m (1998-2004 / ) To replace the radiator cooling fan, first remove the scuttle panel by taking out the various fixing pins and plastic clips securing the grille; once…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos