Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the uConnect system?

Model: Chrysler Voyager MK 5 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

To reset the uConnect system on a Chrysler Voyager, disconnect and reconnect the specific fuse responsible for the system's operation. First, open the bonnet and then open the fuse box located at the top right of the engine compartment.

This way, you can locate the fuse, which is indicated in the manual as number F20. This fuse can then be disconnected and reconnected. You will notice that the uConnect system will be fully restored.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

Webasto System for Chrysler Voyager 2.5 CRD
Webasto System for Chrysler Voyager 2.5 CRD
Chrysler Voyager (2000-2007 / MK 4) The Webasto system is a parking heater that allows you to heat the cabin without starting the engine. It operates independently, using the vehicle's …
Resetting the Service Light on the Chrysler Voyager
Resetting the Service Light on the Chrysler Voyager
Chrysler Voyager (2020-2026 / MK 6) When it's time to change the oil on the Chrysler Voyager, a message appears on the instrument display reminding you of the need for replacement. Afte…
How to Remove the Cooling Radiator on Chrysler Voyager
How to Remove the Cooling Radiator on Chrysler Voyager
Chrysler Voyager (2000-2007 / MK 4) To remove the cooling radiator on a Chrysler Voyager, open the bonnet. Using a suitable socket wrench, remove the front headlights and take them out.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos