Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cooling Radiator on Chrysler Voyager

Model: Chrysler Voyager MK 4 - Years 2000-2007
Part: Radiator

To remove the cooling radiator on a Chrysler Voyager, open the bonnet. Using a suitable socket wrench, remove the front headlights and take them out. Remove the front bumper and start unscrewing the plates that secure the radiator at the top. Then, lift the car on a column lift and loosen the clamp on the water hose. Disconnect the various hoses of the cooling system with pliers. If necessary, unscrew the lock that secures the bonnet to facilitate removal. Once free from screws and hoses, you can extract the fan assembly and then the radiator from the engine bay. Prepare to fit the new part in the engine bay: install the cooling fans, clamps, pins, and various pipes. Refit the radiator mounting brackets with all the disassembled parts.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Chrysler Voyager?
Where are the fuses located in the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) The fuse boxes of the Chrysler Voyager are responsible for containing the fuses that manage the operation of the devices installed on the car: in thi…
Where are the fuses located in the Chrysler Voyager?
Where are the fuses located in the Chrysler Voyager?
Chrysler Voyager (2020-2026 / MK 6) The fuses of the Chrysler Voyager are contained inside the appropriate fuse box that is installed on the vehicle: in this car model, only one box can…
How to Remove the Gearbox from a Chrysler Voyager?
How to Remove the Gearbox from a Chrysler Voyager?
Chrysler Voyager (2000-2007 / MK 4) To remove the gearbox from a Chrysler Voyager, lift the vehicle using a jack or ramp, so you can remove the front right wheel to access the component…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos