Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Diagram for a Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

Today, we will look at all the diagrams and layouts of the fuse boxes found in a Citroen Jumper, second generation, produced from 2006 to 2014. The first fuse box shown in the video is located under the dashboard on the driver's side, accessible by removing a plastic panel at the bottom of the dashboard to the left of the steering wheel.

The second can be found inside the left door pillar, and finally, the third fuse box is located in the engine compartment.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram for the Citroen Jumper Van?
What is the Fuse Diagram for the Citroen Jumper Van?
Citroen Jumper (2006-2014 / MK 2) If a device in your Citroen Jumper van suddenly stops working, the first thing you can do is check the status of the respective fuses, the diagrams f…
How to Replace the Glow Plugs on a Citroen Jumper
How to Replace the Glow Plugs on a Citroen Jumper
Citroen Jumper (1994-2006 / MK 1) Before you can start, open the front bonnet of your Citroen Jumper. Begin by removing the exhaust manifold by unscrewing and removing the related fix…
Where to Find the OBD2 Port on a Citroen Jumper
Where to Find the OBD2 Port on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) If you are curious about where to find the OBD2 port on your Citroen Jumper, simply read the following steps carefully and apply them. First, open th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos