Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Xsara Picasso
  6. : How to remove the headlight of the Citroen Xsara

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Headlight
Operation: How to remove the headlight of the Citroen Xsara

If you have to replace the front headlight of this model of car, you must first remove the front bumper as the fixing pins of the headlight itself are located below the angle of the bumper; you will start by removing the screws that secure the lower edge of the bumper and then those along the edge of the wheel arch; at this point, the edge of the bumper can be unhooked from the fender and moved far enough away to access the fixing pins of the headlight which are located under the lower edge and then on the bumper grille band; at this point it is possible to move the spotlight away from its seat and disconnect the power plug.


Posted on 12 October 2023 by ScegliAuto



Replacement headlight bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the Xsara Picasso headlight bulbs burned out and therefore need to be replaced? Let's see how they disassemble. We open the front hood by pulling
How to replace the headlight bulbs in Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In this tutorial we can see how to replace the headlight bulbs in the Citroen Xsara Picasso, a very simple and fast operation. Before proceeding, let
Removal of Citroen Xsara Picasso bulb
Citroen Xsara Picasso (1999-2012 / MK 1) In this short but effective video we will see how to remove the headlight bulb (high and low beam) of the Citroen Xsara Picasso. The removal of the b

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos