Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

Video tutorial

Using a small flat screwdriver or a plastic wedge, remove the cover of the central handle by prying it in the slot. Unscrew the two screws now accessible on the same handle using a Torx screwdriver.

Remove the speaker grille by prying in the surrounding slot and unscrewing the Torx screws underneath. Take out the speaker by disconnecting its connector.

Unscrew two more Torx screws and gently pull out the panel by hand, guiding it carefully at all points. As you can see, this is a job within everyone's reach.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Replacing Door Panel on Citroen Xsara Picasso
Replacing Door Panel on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Remove the door panel on a Xsara Picasso. Disconnect the battery terminals located in the engine bay. Remove the plastic from the door panel area (sp…
Removing the Front Door Panel from the Citroen Xsara Picasso
Removing the Front Door Panel from the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Let's see the instructions that will allow us to remove and replace the front door panel of the Citroen Xsara Picasso in simple steps. First, open th…
Removing the Speaker on a Citroen Xsara Picasso
Removing the Speaker on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Removing the damaged speaker from a Xsara Picasso? Here’s how to take it out from inside the panel. Remove the plastic grille covering the speaker by…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos