Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to drain and replace the fuel in the tank on the Citroen C1

Model: Citroen C1 MK 2 - Years 2014-2022

In this video, we will discover a method to drain and remove the old fuel from the second-generation Citroen C1. First, remove the rear seat to access the fuel pump; then remove the cover and disconnect the fuel hoses, as shown in the video. At this point, disconnect the electrical connector and unscrew the pump collar; extract the pump to access the tank and the fuel. Now you can drain the old fuel using a pump!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump in the Citroen C1?
How to replace the fuel pump in the Citroen C1?
Citroen C1 (2005-2014 / MK 1) In this tutorial we can see how to replace the fuel pump in the Citroen C1, an extremely simple and quick operation. First of all, make sure that the…
Replacing and Topping Up Radiator Fluid on Citroen C1
Replacing and Topping Up Radiator Fluid on Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, learn how to replace and top up the radiator fluid on a first-generation Citroen C1 in simple steps. First, lift the vehicle …
How to Replace the Fuel Pump/Fuel Float on the Citroen C1
How to Replace the Fuel Pump/Fuel Float on the Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, you will learn how to remove and replace the fuel pump or float pump on the Citroen C1 first series, as well as on the Peugeo…

Other guides you may be interested in

    Frequently Asked Questions

    • C1 2005-2014 - How many liters is the fuel reserve of the Citroen C1? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos