Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4
    4. : Display replacement on Citroen C4

Citroen C4 - Video tutorial

Model: Citroen C4 MK 2 - Years 2010-2018
Part: Instrument cluster
Operation: Display replacement on Citroen C4

We want to remove the information display placed on the dashboard of the Citroen C4 car. We detach the on-board computer of the Peugeot from the dashboard with a plastic lever or screwdriver. Once the piece has been extracted from the dashboard (by levering), we disconnect all the power supply terminals (if we need to replace the piece) or replace the damaged LEDs present in the on-board computer. We mount the piece in the upper part of the dashboard (we fit the metal clips). After having connected all the electrical terminals and having finished the information display, we just have to test its operation.


Posted on 29 March 2024 by ScegliAuto

    Frequently Asked Questions

    • C4 2004-2010 - Why won't the dashboard of the Citroen C4 turn on? Read Answer
    • C4 2020-2027 - What does it mean when the esp light comes on on Citroen C4? Read Answer
    • C4 2020-2027 - How are the warning lights on the Citroen C4 identified? Read Answer
    • C4 2010-2018 - What does the flashing light on the AdBlue on the Citroen C4 mean? Read Answer
    • C4 2020-2027 - What does the Citroen C4 AdBlue warning light mean? Read Answer
    • C4 2020-2027 - What does the Citroen C4 AdBlue warning light mean? Read Answer
    • C4 2010-2018 - What to do when the engine failure warning light comes on on the Citroen C4 cactus? Read Answer
    • C4 2010-2018 - How do you reset the tire pressure warning light on the Citroen C4 Cactus? Read Answer
    • C4 2010-2018 - What are the main warning lights on the Citroen C4? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos