Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Intake Manifold Gasket Replacement

Model: Citroen Xsara MK 1 - Years 1997-2006
Part: Engine

The intake manifold gasket consists of four rubber rings that must be placed in their respective grooves corresponding to the intake ports; once the gaskets are positioned, place the intake manifold onto the cylinder head and tighten the securing bolts with a torque wrench. The sealing of the intake duct is absolutely essential to ensure the correct airflow to the engine and guarantee its proper functioning; a leak in the intake duct would certainly cause losses and performance issues in the engine.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Exhaust Manifold Gasket
Replacing the Exhaust Manifold Gasket
Citroen Xsara (1997-2006 / MK 1) Before applying the new gasket, it is absolutely essential to clean the gasket seating area thoroughly, both on the cylinder head side and the manifo…
Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Citroen Xsara (1997-2006 / MK 1) After resurfacing the cylinder head, check the flatness of the surface using a straight edge and a feeler gauge; repeat the same check on the cylinde…
Replacing the Cylinder Head Gasket
Replacing the Cylinder Head Gasket
Citroen Xsara (1997-2006 / MK 1) When replacing the cylinder head gasket, it is good practice to have the head itself skimmed to eliminate any warping caused by overheating; after sk…

Other guides you may be interested in

How to Disassemble the Remote Key of a Mercedes C-Class

In this video, see how to disassemble the remote key of a Mercedes C-Class. Take your ignition remote and remove the metal key (if present). Insert a lever into the cover slot and press inside. When you hear a click, the cover will be open. Use a small screwdriver to remove the dead battery; take off the side plastics. Separate the cover into two parts and take out the circuit board. Reassemble the new key cover by pressing on the key cover until you hear the locking click (assemble all the pieces). Check that it functions correctly.

Watch the video!


by ScegliAuto

More videos