Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide on How to Change the Timing Belt of the Citroen C2 1.1

Model: Citroen C2 MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Timing belt

Video tutorial

In this guide, follow the main steps to remove and replace the timing belt of the Citroen C2 1.1 petrol engine, as well as the C3 with the same engine. First, lift the vehicle and begin by removing the front right wheel, then take off the wheel arch liner; next, remove the auxiliary belt by unscrewing the bolts of the crankshaft pulley.

At this point, lift the engine with a jack and remove the engine mount located on the left side of the engine bay by unscrewing the screws; take off the timing cover to access the belt, and then replace it!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Citroen C2
How to Change the Engine Oil and Oil Filter on the Citroen C2
Citroen C2 (2003-2010 / MK 1) In this video, you will see the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Citroen C2. First, …
Guide to disassembling the front fender of the Citroen C2
Guide to disassembling the front fender of the Citroen C2
Citroen C2 (2003-2010 / MK 1) In this guide we will see the procedure for disassembling and replacing the front fender of the Citroen C2, in simple steps. First, we open the hood …
How to replace the front brake pads of the Citroen C2.
How to replace the front brake pads of the Citroen C2.
Citroen C2 (2003-2010 / MK 1) Today we will see step-by-step instructions on how to disassemble and replace the front brake pads of the Citroen C2. First, we lift the vehicle and …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos