Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the inertia switch located in the Citroen Berlingo?

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Checks and maintenance

In this video, you will see where the inertia switch is located in the Citroen Berlingo. This device is designed to cut off the fuel supply to the engine in case of an accident, thereby reducing the risk of fire. As shown, the inertia switch is located inside the engine compartment, specifically on the right wall. It is easily identifiable by a large red button, which must be pressed to reset the system. Before doing this, conduct a thorough inspection of the vehicle to assess its condition.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Reverse light switch position on the Citroen Berlingo
Reverse light switch position on the Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) In this video we can see where the reverse light switch is located on the Citroen Berlingo. Of course, this switch is located on the gearbox, but it …
Where is the oil pressure sensor located in the Citroen Berlingo van?
Where is the oil pressure sensor located in the Citroen Berlingo van?
Citroen Berlingo (2018-2026 / MK 3) In this video, you can see where the engine oil pressure sensor is located in the Citroen Berlingo van, useful in case you need to replace it due to …
Where is the OBD port located in the Citroen Berlingo van?
Where is the OBD port located in the Citroen Berlingo van?
Citroen Berlingo (2008-2018 / MK 2) In this video we can see where the OBD port is located in the Citroen Berlingo, useful for example in case we need to read the errors recorded by the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos