Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Driveshaft

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Axle shaft

The driveshaft is a component of the transmission that transfers energy from the engine to the wheels, allowing the vehicle to operate correctly. This guide shows how to properly change a driveshaft. Once the old driveshaft is removed, lift the car with a jack. Then remove the wheel by unscrewing the bolts. To detach the driveshaft from the hub carrier, you need to remove the tripod. After completing this simple task, you can slide out the driveshaft without any particular difficulty. Install the new replacement part as the one removed previously.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light of a Citroen Berlingo
Replacing the Rear Light of a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Is the light on your car broken and needs replacing? Let's look at removing the rear light of a Citroen Berlingo. Open and lift the tailgate of the l…
Position of the drain and fill plugs of the Citroen Berlingo gearbox
Position of the drain and fill plugs of the Citroen Berlingo gearbox
Citroen Berlingo (2008-2018 / MK 2) In this video we can see the position of the drain and fill plugs of the gearbox of the Citroen Berlingo and the Peugeot Partner; in fact, they are e…
Disassembly of the Citroen Berlingo car radio
Disassembly of the Citroen Berlingo car radio
Citroen Berlingo (2008-2018 / MK 2) If we want to improve the performance of the audio system installed on the Citroen Berlingo, we can start by replacing the standard RD4 car radio wit…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos