Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Cactus
    4. : Why did the AdBlue light come on in the Citroen C4 Cactus?

Citroen Cactus - Video tutorial

Model: Citroen Cactus MK 1 - Years 2014-2020
Part: Checks and maintenance
Operation: Why did the AdBlue light come on in the Citroen C4 Cactus?

If the AdBlue warning light has come on in the dashboard of our Citroen C4 Cactus, it means that the pollution control fluid has reached a too low level and therefore needs to be topped up. This is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, let's get a 10-liter can of fluid, then turn off the engine, open the trunk door, and remove both the bottom panel and the spare wheel. Next, unscrew the large central cap, insert the can's tube into the hole, and pour the necessary amount of fluid into the tank.


Posted on 23 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Cactus 2014-2020 - What are the orange warning lights on the Citroën C4 Cactus? Read Answer
    • Cactus 2014-2020 - What are the warning lights on the Citroën C4 Cactus? Read Answer
    • Cactus 2014-2020 - What to do if the AdBlue warning light comes on in the Citroen C4 Cactus? Read Answer
    • Cactus 2014-2020 - When does the adblue warning light on the Citroen C4 Cactus come on? Read Answer
    • Cactus 2014-2020 - How much is the additional fluid tank of the Citroà «n C4 Cactus? Read Answer
    • Cactus 2014-2020 - What to do if the engine light comes on in the Citroen C4 Cactus? Read Answer
    • Cactus 2014-2020 - What to do in case of problems with the automatic transmission in the Citroen C4 Cactus? Read Answer
    • Cactus 2014-2020 - How to reset the "Service" light on a Citroen C4 Cactus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos