Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Front bumper

Citroen Xsara Picasso - Front bumper

Front Bumper Citroen Xsara Picasso (1999-2012 / mk 1)

Citroen Xsara Picasso (1999-2012 / MK 1)
How do you remove the bumper of the Citroen Xsara Picasso?
Here we are with a short but comprehensive video guide, useful in case you want to do-it-yourself the disassembly of the front bumper of your Citroen Xsara …Read all…
Posted on 4 February 2025 by ScegliAuto
Airbag (2) Alternator (1) Speaker (1) Shocks (1) Car stereo (8) Roof rack bars (1) Battery (27) Air vents (1) Transmission (2) Spark plugs (2) Body (1) Control unit (2) Key (8) Timing belt (7) V-belt (5) Checks and maintenance (6) Dashboard (3) Shifter boot (2) Brake rotors (2) Headlight (4) Tail light (5) Fog lights (1) Air filter (7) Cabin air filter (5) Fuel filter (2) Diesel fuel filter (4) Oil filter (1) Clutch (7) Light bulb (1) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (2) Instrument panel light (9) License plate light (2) (2) Power window motor (1) Starter motor (4) Engine oil (3) Clock (7) Door trim panel (7) Front bumper (1) Rear bumper (2) Brake pads (1) Hydraulic pistons (1) Shift knob (7) Fuel pump (9) Car door (2) Instrument cluster (2) Radiator (2) Heater core (4) Heater control valve (2) Wheel (1) Fuse box (19) Seat (11) Engine coolant temperature sensor (2) Suspension system (1) Side mirror (4) Warning light – error code (4) Service warning light (16) Windshield wipers (3) Thermostat (1) Blower motor (4) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos