Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Citroen Xsara Picasso - Door panel

Citroen Xsara Picasso (1999-2012 / MK 1)
Disassembly of the front door panel of the Citroen Xsara Picasso.
Let's see the instructions that will allow us to disassemble and replace the front door panel of the Citroen Xsara Picasso, in simple steps. First, we open the …read all…
Posted on 2 October 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Removing the door panel on Citroen Xsara Picasso
Using a small flat screwdriver or plastic wedge, remove the central handle cover by prying it into the slot. Unscrew the two screws accessible at this point of …read all…
Posted on 23 February 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to remove the door panel of a Citroen Xsara Picasso
Before we can start, we will have to go and open the door of our Citroen Xsara Picasso. So let's start by disengaging the insert of the internal door handle, …read all…
Posted on 4 January 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Removal of Citroen Xsara Picasso door panel
In this video tutorial we will see how to remove the door panel on a Citroen Xsara Picasso, following these simple steps. First of all we open the front door …read all…
Posted on 3 January 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Remove the internal door panel of an Xsara Picasso
Remove the internal panel of the Xsara Picasso door? Let's see how to disassemble the panel. We detach the cover of the handle, unscrew the screws placed …read all…
Posted on 17 December 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Door panel replacement on Citroen Xsara Picasso
Removing the door panel of an Xsara Picasso, let's see how to remove the piece from above the door. We disconnect the battery terminals in the engine …read all…
Posted on 2 December 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the door panel of the Citroen Xsara Picasso
As a first operation, open the door in question, then with a plastic lever lift the edge of the handle and remove it, now unscrew the screw that was hidden on …read all…
Posted on 27 September 2023 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Roof Rack Bars (1) Battery (18) Air Vents (1) Gearbox (2) Spark plugs (1) Bodywork (1) Control unit (3) Key (5) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (12) Dashboard (2) Brake discs (2) Headlight (2) Tail light (5) Air filter (3) Cabin air filter (4) Petrol filter (1) Diesel filter (4) Clutch (5) Light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (7) License plate light (1) Third brake light (1) Window motor (1) Starter motor (1) Door panel (7) Rear bumper (1) Brake pads (1) Gear Shift Knob (6) Fuel pump (5) Door (1) Instrument cluster (4) Radiator (1) Passenger compartment heating radiator (3) Cockpit heating cock (2) Wheel (1) Fuse box (9) Seat (5) Coolant temperature sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (4) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos