Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Xsara Picasso
  6. : License plate light

Citroen Xsara Picasso - License plate light

License Plate Light Citroen Xsara Picasso (1999-2012 / mk 1)

Citroen Xsara Picasso (1999-2012 / MK 1)
How to Replace the Number Plate Bulb on a Citroen Xsara Picasso

The following video tutorial shows the steps to replace the number plate light on a Citroen Xsara Picasso vehicle. It is very important that the number plate …Read all…
Posted on 14 September 2026 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Replacing Number Plate Bulb on Citroen Xsara Picasso

How to replace the number plate light bulb on Xsara Picasso? Remove the light unit that illuminates the number plate. Lift the boot, remove the rear cover: …Read all…
Posted on 3 May 2026 by ScegliAuto

Airbag (2) Alternator (1) Speaker (1) Shocks (1) Car stereo (7) Roof rack bars (1) Battery (27) Air vents (1) Transmission (2) Spark plugs (2) Body (1) Control unit (2) Key (8) Timing belt (7) V-belt (5) Checks and maintenance (6) Dashboard (3) Shifter boot (2) Brake rotors (2) Headlight (4) Tail light (5) Fog lights (1) Air filter (7) Cabin air filter (5) Fuel filter (2) Diesel fuel filter (4) Oil filter (1) Clutch (7) Light bulb (1) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (2) Instrument panel light (9) License plate light (2) (2) Power window motor (1) Starter motor (4) Engine oil (3) Clock (7) Door trim panel (7) Front bumper (1) Rear bumper (2) Brake pads (1) Hydraulic pistons (1) Shift knob (7) Fuel pump (9) Car door (2) Instrument cluster (2) Radiator (2) Heater core (4) Heater control valve (2) Wheel (1) Fuse box (19) Seat (11) Engine coolant temperature sensor (2) Suspension system (1) Side mirror (4) Warning light – error code (4) Service warning light (16) Windshield wipers (3) Thermostat (1) Blower motor (4) Steering wheel (3)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos