Do it yourself
Frequently asked questions about cars and motorcycles

Citroen Xsara Picasso - Fuel pump

Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the fuel pump of the Citroen Xsara Picasso

Today's information will show us how to disassemble and replace the fuel pump of the Citroen Xsara Picasso. First, we open the rear doors and start …read all…
Posted on 10 March 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to disassemble the high-pressure fuel pump of the Citroen Xsara Picasso 2.0 HDI.

Today in this guide, we will see the instructions that will allow us to disassemble and replace the high-pressure diesel fuel pump of the Citroen Xsara Picasso …read all…
Posted on 23 August 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How do you disassemble the float of the Citroà «n Xsara Picasso?

In order to access the float of the Citroà «n Xsara Picasso you have to remove the rear seats, together with the carpet that covers the floor of the car. The …read all…
Posted on 24 February 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Diesel pump replacement on Xsara Picasso

Do we want to remove the fuel pump on Xsara Picasso? Let's see how the Xsara Picasso tank is removed from inside. To disassemble the pump we have two options: …read all…
Posted on 28 December 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to disassemble the fuel pump on Citroen Xsara Picasso

How to disassemble the fuel pump on Citroen Xsara Picasso? To begin, we disconnect the battery cables, then, we remove the seats from the rear seats of the …read all…
Posted on 27 October 2023 by ScegliAuto

Airbags (2) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Roof Rack Bars (1) Battery (18) Air Vents (1) Gearbox (2) Spark plugs (1) Bodywork (1) Control unit (3) Key (5) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (12) Dashboard (2) Brake discs (2) Headlight (2) Tail light (5) Air filter (3) Cabin air filter (4) Petrol filter (1) Diesel filter (4) Clutch (5) Light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (7) License plate light (1) Third brake light (1) Window motor (1) Starter motor (1) Door panel (7) Rear bumper (1) Brake pads (1) Gear Shift Knob (6) Fuel pump (5) Door (1) Instrument cluster (4) Radiator (1) Passenger compartment heating radiator (3) Cockpit heating cock (2) Wheel (1) Fuse box (9) Seat (5) Coolant temperature sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (4) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos