Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Timing belt

Citroen Xsara Picasso - Timing belt

Citroen Xsara Picasso (1999-2012 / MK 1)
How do you replace the timing belt on the Citroà «n Xsara Picasso?
In order to replace the Citroà «n Xsara Picasso timing belt, you need to open the hood, so that you can access the components located on the left side of the …read all…
Posted on 3 August 2022 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Replace timing belt on Citroen Xsara Picasso
We remove the timing belt if we have exceeded the maximum mileage for vehicle safety. Let's see how the belt is removed. We lift the car onto a column bridge; …read all…
Posted on 7 December 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Citroen Xsara Picasso timing belt replacement
In this video we will see how to replace the timing belt of the Citroen Xsara Picasso. First of all, let's go and lift the car: the operation of removing the …read all…
Posted on 7 December 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Belt and belt tensioner replacement
Get the replacement belts, loosen the wheel nuts and lift the car to secure it. Unscrew the bolts and remove the wheel, brake, mudguard and casing. Remove the …read all…
Posted on 12 July 2023 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Roof Rack Bars (1) Battery (18) Air Vents (1) Gearbox (2) Spark plugs (1) Bodywork (1) Control unit (3) Key (5) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (12) Dashboard (2) Brake discs (2) Headlight (2) Tail light (5) Air filter (3) Cabin air filter (4) Petrol filter (1) Diesel filter (4) Clutch (5) Light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (7) License plate light (1) Third brake light (1) Window motor (1) Starter motor (1) Door panel (7) Rear bumper (1) Brake pads (1) Gear Shift Knob (6) Fuel pump (5) Door (1) Instrument cluster (4) Radiator (1) Passenger compartment heating radiator (3) Cockpit heating cock (2) Wheel (1) Fuse box (9) Seat (5) Coolant temperature sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (4) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos