Do it yourself
Frequently asked questions about cars and motorcycles

Citroen Xsara Picasso - Airbag

Airbag Citroen Xsara Picasso (1999-2012 / mk 1)

Citroen Xsara Picasso (1999-2012 / MK 1)
Removing the Steering Wheel Airbag of the Citroen Xsara Picasso

In this brief guide, follow the instructions to remove and replace the steering wheel airbag of the Citroen Xsara Picasso. First, get into the driver's seat …Read all…
Posted on 12 September 2026 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to remove the airbag from a Citroen Xsara Picasso

How to remove the airbag from a Citroen Xsara Picasso? Let's see how to disassemble the airbag located above the steering wheel. Disconnect the battery …Read all…
Posted on 26 May 2026 by ScegliAuto

Airbag (2) Alternator (1) Speaker (1) Shocks (1) Car stereo (7) Roof rack bars (1) Battery (27) Air vents (1) Transmission (2) Spark plugs (2) Body (1) Control unit (2) Key (8) Timing belt (7) V-belt (5) Checks and maintenance (6) Dashboard (3) Shifter boot (2) Brake rotors (2) Headlight (4) Tail light (5) Fog lights (1) Air filter (7) Cabin air filter (5) Fuel filter (2) Diesel fuel filter (4) Oil filter (1) Clutch (7) Light bulb (1) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (2) Instrument panel light (9) License plate light (2) (2) Power window motor (1) Starter motor (4) Engine oil (3) Clock (7) Door trim panel (7) Front bumper (1) Rear bumper (2) Brake pads (1) Hydraulic pistons (1) Shift knob (7) Fuel pump (9) Car door (2) Instrument cluster (2) Radiator (2) Heater core (4) Heater control valve (2) Wheel (1) Fuse box (19) Seat (11) Engine coolant temperature sensor (2) Suspension system (1) Side mirror (4) Warning light – error code (4) Service warning light (16) Windshield wipers (3) Thermostat (1) Blower motor (4) Steering wheel (3)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos