Do it yourself
Frequently asked questions about cars and motorcycles

Citroen Xsara Picasso - Tail light

Citroen Xsara Picasso (1999-2012 / MK 1)
How to remove the rear lights in the Citroen Xsara Picasso?

Removing the rear lights of the Citroen Xsara Picasso, in order to replace a faulty bulb, for example, is a very simple and quick operation. Let's see how to …read all…
Posted on 8 August 2022 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the third rear light bulb on a Citroen Xsara Picasso

Let's see in this video how to replace the third rear light bulb on a Citroen Xsara Picasso. Let's see in this video how to remove the central rear light. We …read all…
Posted on 16 November 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to remove the rear light on a Citroen Xsara Picasso

Let's see how to remove the rear light on a Citroen Xsara Picasso: open the boot of the luggage compartment, remove the cloth inspection cap (located on the …read all…
Posted on 31 October 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to remove the rear light Citroen Xsara Picasso

If you have to replace the rear light bulbs of this car model, you must necessarily remove the light itself, but it is an extremely simple operation; in fact, …read all…
Posted on 24 September 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Replacing the lamp by removing the rear light

To gain access to the light in question, the luggage compartment lid must first be opened. Detach the snap support clips from inside the hood in the slot in …read all…
Posted on 28 June 2023 by ScegliAuto

Airbags (2) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Roof Rack Bars (1) Battery (18) Air Vents (1) Gearbox (2) Spark plugs (1) Bodywork (1) Control unit (3) Key (5) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (12) Dashboard (2) Brake discs (2) Headlight (2) Tail light (5) Air filter (3) Cabin air filter (4) Petrol filter (1) Diesel filter (4) Clutch (5) Light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (7) License plate light (1) Third brake light (1) Window motor (1) Starter motor (1) Door panel (7) Rear bumper (1) Brake pads (1) Gear Shift Knob (6) Fuel pump (5) Door (1) Instrument cluster (4) Radiator (1) Passenger compartment heating radiator (3) Cockpit heating cock (2) Wheel (1) Fuse box (9) Seat (5) Coolant temperature sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (4) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos