Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Gear Shift Knob

Citroen Xsara Picasso - Gear Shift Knob

Citroen Xsara Picasso (1999-2012 / MK 1)
How do you replace the gear knob of the Citroën Xsara Picasso?
In order to replace the gear knob of the Citroën Xsara Picasso, you need to pry it off with an object so that you can detach the hooks located at the bottom …read all…
Posted on 11 April 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to change the gear knob on a Citroen Xsara Picasso.
In this video we see how to change the gear knob on a Citroen Xsara Picasso: the first thing to do is to pull the gear lever boot off the shift lever, removing …read all…
Posted on 27 April 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the gear knob of the Citroen Xsara Picasso
For this guide we will describe the procedure for replacing the gear knob for the Citroen Xsara Picasso. The steps to follow are, in order, as follows: 1. …read all…
Posted on 3 June 2022 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to remove the knob on Citroen Xsara Picasso
We replace the damaged gear knob on Citroen Xsara Picasso: to begin with, take the knob in your hands and rotate it left and right until it is removed from the …read all…
Posted on 29 October 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the gear knob of the Citroen Xsara Picasso
To carry out this simple process, only a few steps will be necessary, in fact the first operation will be to pull the leather of the gearshift gaiter towards …read all…
Posted on 4 October 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the gear knob of the Citroen Xsara Picasso
Would you like to give your car a new look and want to start doing it from the small details? Well, this guide is for you! In fact, we will show you how to …read all…
Posted on 21 September 2023 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Roof Rack Bars (1) Battery (18) Air Vents (1) Gearbox (2) Spark plugs (1) Bodywork (1) Control unit (3) Key (5) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (12) Dashboard (2) Brake discs (2) Headlight (2) Tail light (5) Air filter (3) Cabin air filter (4) Petrol filter (1) Diesel filter (4) Clutch (5) Light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (7) License plate light (1) Third brake light (1) Window motor (1) Starter motor (1) Door panel (7) Rear bumper (1) Brake pads (1) Gear Shift Knob (6) Fuel pump (5) Door (1) Instrument cluster (4) Radiator (1) Passenger compartment heating radiator (3) Cockpit heating cock (2) Wheel (1) Fuse box (9) Seat (5) Coolant temperature sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (4) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos