Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Xsara Picasso
  6. : Passenger compartment heating radiator

Citroen Xsara Picasso - Passenger compartment heating radiator

Citroen Xsara Picasso (1999-2012 / MK 1)
Citroen Xsara Picasso heating radiator disassembly guide

Let's find out how to remove and replace the radiator of the passenger compartment heating of the Citroen Xsara Picasso, following the instructions below. …read all…
Posted on 17 April 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Remove the heating radiator on Citroen Xsara Picasso

Does the air heating in the car no longer work? Let's see how to disassemble the heating radiator in a Citroen Xsara Picasso. We remove the plastic of the …read all…
Posted on 29 November 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Interior ventilation fan motor replacement

The driving motor of the passenger compartment ventilation fan is located behind the central tunnel and to be able to extract it from its seat it is necessary …read all…
Posted on 23 August 2023 by ScegliAuto

Airbags (2) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Roof Rack Bars (1) Battery (18) Air Vents (1) Gearbox (2) Spark plugs (1) Bodywork (1) Control unit (3) Key (5) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (12) Dashboard (2) Brake discs (2) Headlight (2) Tail light (5) Air filter (3) Cabin air filter (4) Petrol filter (1) Diesel filter (4) Clutch (5) Light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (7) License plate light (1) Third brake light (1) Window motor (1) Starter motor (1) Door panel (7) Rear bumper (1) Brake pads (1) Gear Shift Knob (6) Fuel pump (5) Door (1) Instrument cluster (4) Radiator (1) Passenger compartment heating radiator (3) Cockpit heating cock (2) Wheel (1) Fuse box (9) Seat (5) Coolant temperature sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (4) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos