Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Xsara Picasso
  6. : Instrument cluster

Citroen Xsara Picasso - Instrument cluster

Instrument Cluster Citroen Xsara Picasso (1999-2012 / mk 1)

Citroen Xsara Picasso (1999-2012 / MK 1)
How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a …Read all…
Posted on 20 March 2026 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Instructions for Removing the Instrument Cluster

The first operation to perform is the removal of the plastic trim surrounding the instrument cluster: it is simply clipped in place, so use a plastic spatula …Read all…
Posted on 9 February 2026 by ScegliAuto

Airbag (2) Alternator (1) Speaker (1) Shocks (1) Car stereo (7) Roof rack bars (1) Battery (27) Air vents (1) Transmission (2) Spark plugs (2) Body (1) Control unit (2) Key (8) Timing belt (7) V-belt (5) Checks and maintenance (6) Dashboard (3) Shifter boot (2) Brake rotors (2) Headlight (4) Tail light (5) Fog lights (1) Air filter (7) Cabin air filter (5) Fuel filter (2) Diesel fuel filter (4) Oil filter (1) Clutch (7) Light bulb (1) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (2) Instrument panel light (9) License plate light (2) (2) Power window motor (1) Starter motor (4) Engine oil (3) Clock (7) Door trim panel (7) Front bumper (1) Rear bumper (2) Brake pads (1) Hydraulic pistons (1) Shift knob (7) Fuel pump (9) Car door (2) Instrument cluster (2) Radiator (2) Heater core (4) Heater control valve (2) Wheel (1) Fuse box (19) Seat (11) Engine coolant temperature sensor (2) Suspension system (1) Side mirror (4) Warning light – error code (4) Service warning light (16) Windshield wipers (3) Thermostat (1) Blower motor (4) Steering wheel (3)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos