Do it yourself
Frequently asked questions about cars and motorcycles

Citroen Xsara Picasso - Clutch

Citroen Xsara Picasso (1999-2012 / MK 1)
Replacement of the clutch for the Citroen Xsara Picasso 1.6L.

Let's see the steps that will allow us to disassemble and replace the clutch of the Citroen Xsara Picasso with a 1.6 engine; the clutch disassembly process …read all…
Posted on 10 September 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Guide to replacing the clutch of the Citroen Xsara Picasso 1.6 HDI

Let's find out in this guide the main instructions to be able to remove and replace the clutch plates of the Citroen Xsara Picasso 1.6 HDI. First we open the …read all…
Posted on 15 May 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Citroen Xsara Picasso 2.0 HDI clutch replacement instructions

We see in this video all the instructions that will allow us to remove and replace the clutch on a 2003 Citroen Xsara Picasso 2.0 HDI. First of all, let's lift …read all…
Posted on 31 March 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
Replacement of the clutch cable in the Citroen Xara Picasso.

We first place the car, Citroen Xsara Picasso, on a floor or on the deck. This is a precaution to be taken every time we have to carry out a maintenance …read all…
Posted on 25 December 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the clutch on the Citroen Xsara Picasso

Replacing the clutch is not really an easy do-it-yourself maintenance since you need good knowledge of general mechanics as well as special tools for centering …read all…
Posted on 14 October 2023 by ScegliAuto

Airbags (2) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Roof Rack Bars (1) Battery (18) Air Vents (1) Gearbox (2) Spark plugs (1) Bodywork (1) Control unit (3) Key (5) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (12) Dashboard (2) Brake discs (2) Headlight (2) Tail light (5) Air filter (3) Cabin air filter (4) Petrol filter (1) Diesel filter (4) Clutch (5) Light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (7) License plate light (1) Third brake light (1) Window motor (1) Starter motor (1) Door panel (7) Rear bumper (1) Brake pads (1) Gear Shift Knob (6) Fuel pump (5) Door (1) Instrument cluster (4) Radiator (1) Passenger compartment heating radiator (3) Cockpit heating cock (2) Wheel (1) Fuse box (9) Seat (5) Coolant temperature sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (4) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos