Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Clutch

Replacing the clutch is not an easy DIY maintenance task as it requires good general mechanical knowledge as well as specific tools for centring the disc and the release bearing. That said, it is advisable to lift the vehicle on a ramp rather than on axle stands for better manoeuvring space. Disconnect the battery and free the driveshaft on the gearbox side from the wheel hub to extract it from the gearbox. Then, remove the gearbox from the engine and proceed with replacing the clutch kit before reassembling everything.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the clutch cable of the Citroen Xsara Picasso 2.0 HDI
Replacement of the clutch cable of the Citroen Xsara Picasso 2.0 HDI
Citroen Xsara Picasso (1999-2012 / MK 1) Today's main instructions will guide us through the process of disassembling and replacing the clutch cable of the Citroen Xsara Picasso 2.0 HDI. In …
Guide to Replacing the Clutch Cable on the Citroen Xsara Picasso
Guide to Replacing the Clutch Cable on the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) This guide shows you how to remove and replace the clutch cable on the Citroen Xsara Picasso. First, open the bonnet and disconnect the clutch cable …
Replacing the Clutch on Citroen Xsara Picasso 2.0 HDi
Replacing the Clutch on Citroen Xsara Picasso 2.0 HDi
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions that will allow you to remove and replace the clutch on the Citroen Xsara Picasso 2.0 HDi. First, open the vehicle's bonne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos