Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Xsara Picasso
  6. : Power window motor

Citroen Xsara Picasso - Power window motor

Power Window Motor Citroen Xsara Picasso (1999-2012 / mk 1)

Citroen Xsara Picasso (1999-2012 / MK 1)
Remove the Right Front Window Regulator on a Citroen Xsara Picasso

To remove the right window regulator on a Citroen Xsara Picasso, start by disconnecting the battery terminals. Use a screwdriver to detach the internal speaker …Read all…
Posted on 14 April 2026 by ScegliAuto

Airbag (2) Alternator (1) Speaker (1) Shocks (1) Car stereo (8) Roof rack bars (1) Battery (28) Air vents (1) Transmission (2) Spark plugs (2) Body (1) Control unit (2) Key (8) Timing belt (7) V-belt (5) Air conditioner (1) Checks and maintenance (6) Dashboard (3) Shifter boot (2) Brake rotors (2) Headlight (4) Tail light (5) Fog lights (1) Air filter (7) Cabin air filter (5) Fuel filter (2) Diesel fuel filter (4) Oil filter (1) Clutch (7) Light bulb (1) Headlight bulb (8) Tail light bulb (5) Interior dome light bulb (2) Instrument panel light (9) License plate light (2) (2) Power window motor (1) Starter motor (4) Engine oil (3) Clock (8) Door trim panel (7) Front bumper (1) Rear bumper (2) Brake pads (1) Hydraulic pistons (1) Shift knob (7) Fuel pump (9) Car door (2) Instrument cluster (2) Radiator (2) Heater core (4) Heater control valve (2) Wheel (1) Fuse box (19) Seat (11) Engine coolant temperature sensor (2) Suspension system (1) Side mirror (4) Warning light – error code (4) Service warning light (17) Windshield wipers (3) Thermostat (1) Blower motor (4) Steering wheel (3)

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos