Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Remove the right front window lifter Citroen Xsara Picasso

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Window motor
Operation: Remove the right front window lifter Citroen Xsara Picasso

Let's remove the right window lifter of a Citroen Xsara Picasso, let's see how to do it. We disconnect the battery terminals. With a screwdriver we go to detach the internal grille of the speaker being careful not to break it. Once removed, unscrew the screws on the panel with a screwdriver or cordless screwdriver. We detach the door panel, unhook the clamps of the window lifters and the loudspeaker. We detach the adhesive cover from the sheet metal, unscrew the screws of the window lifter motor with a screwdriver and the lifter. We replace the old piece with a new one. We fix the window lifter rail, the motor and then we tighten all the screws.


Posted on 14 December 2023 by ScegliAuto



Removal of Citroen Xsara Picasso door panel
Citroen Xsara Picasso (1999-2012 / MK 1) In this video tutorial we will see how to remove the door panel on a Citroen Xsara Picasso, following these simple steps. First of all we open the fr
Replacement headlight bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the Xsara Picasso headlight bulbs burned out and therefore need to be replaced? Let's see how they disassemble. We open the front hood by pulling
Where are the fuses of the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) Despite there being only one official model of Citroen Xsara Picasso, the fuse layout is not the same for all cars in this line. In fact, it changes

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos