Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Interior blower

Citroen Xsara Picasso - Interior blower

Citroen Xsara Picasso (1999-2012 / MK 1)
Why is the cabin fan of the Citroen Xsara Picasso no longer working?
If the cabin fan of our Citroen Xsara Picasso has suddenly stopped working, the first thing we can do is check the status of the respective fuse whose location …read all…
Posted on 16 April 2024 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to remove the heater fan on Citroen Xsara Picasso
Let's see how to remove the heating fan on a Citroen Xsara Picasso. We remove the plastic of the lining of the central tunnel (located under the central tunnel …read all…
Posted on 27 November 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the fan of a Citroen Xsara Picasso
Let's see in this video how to remove the ventilation fan on a Citroen Xsara Picasso. First we remove the plastic of the central tunnel lining (positioned …read all…
Posted on 18 November 2023 by ScegliAuto
Citroen Xsara Picasso (1999-2012 / MK 1)
How to replace the fan regulator on Citroen Xsara Picasso
How to replace the interior fan resistor on an Xsara Picasso? Let's get a screwdriver or a cordless drill, open the glove compartment and unscrew the …read all…
Posted on 15 October 2023 by ScegliAuto
Airbags (2) Loudspeaker (1) Shock absorbers (1) Car stereo (5) Roof Rack Bars (1) Battery (18) Air Vents (1) Gearbox (2) Spark plugs (1) Bodywork (1) Control unit (3) Key (5) Timing belt (4) V-belt (2) -board computer (1) Checks and maintenance (12) Dashboard (2) Brake discs (2) Headlight (2) Tail light (5) Air filter (3) Cabin air filter (4) Petrol filter (1) Diesel filter (4) Clutch (5) Light bulb (1) Headlight bulb (7) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (7) License plate light (1) Third brake light (1) Window motor (1) Starter motor (1) Door panel (7) Rear bumper (1) Brake pads (1) Gear Shift Knob (6) Fuel pump (5) Door (1) Instrument cluster (4) Radiator (1) Passenger compartment heating radiator (3) Cockpit heating cock (2) Wheel (1) Fuse box (9) Seat (5) Coolant temperature sensor (2) Suspensions (1) Outside rearview mirror (4) Windscreen wipers (2) Thermostat (1) Interior blower (4) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos