Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Dacia Sandero

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Discover the procedure to reset the service light for the routine maintenance oil change on the Dacia Sandero. After completing the service, get into the vehicle and turn on the ignition; then navigate to the vehicle settings until you reach the engine oil section, using the arrow controls on the steering wheel, as shown in the video.

At this point, press and hold the two indicated buttons until the maintenance key light on the instrument cluster resets completely, thus resetting the service!


Updated on 23 October 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to reset the service light of the Dacia Sandero
How to reset the service light of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) Below you will find the description of all the various steps you need to follow if you want to manually reset the service light of your Dacia Sandero…
How do you reset the Service light on the Dacia Sandero?
How do you reset the Service light on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the Service light of the Dacia Sandero, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos