|
Do it yourself
| |||
| ||||
Liquid check on Dacia Duster
Model: Dacia Duster
P1310
- Years 2024-2026
Let's see how to keep the fluids of our Dacia Duster under control for perfect vehicle efficiency: it is an operation that must be done with the engine off and cold and on flat ground. We open the hood and first check the oil level, pulling out the dipstick, cleaning it, putting it back in place, and then checking it again: the level should be just below "max"; otherwise, we add oil with the same specifications as that in the oil pan. Near the right edge of the hood, we find the coolant reservoir: here too, the level should be just below the "max" If it is lower, we add liquid of the same color as the one inside. The windshield washer fluid tank is located near the right edge of the hood: here we must add windshield washer fluid and demineralized water, never tap water that could damage the glass. The battery does not require maintenance; if the brake fluid has dropped, it means we need to change the brake pads.
Posted on 9 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2017-2024 /
HM, MK 2)
The AdBlue warning light on the Dacia Duster appears on the instrument panel when the level of additive liquid in the designated tank is low and need…
Dacia Duster
(2017-2024 /
HM, MK 2)
In this video, you can see how to top up AdBlue in a Dacia Duster. This operation is extremely simple, just like refuelling. With the engine off, ope…
Dacia Duster
(2017-2024 /
HM, MK 2)
In order to reset the AdBlue warning light of the Dacia Duster, you need to open the fuel filler cap of the car, which is located on the rear right s…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.209
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |