Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Permanently Disable Start & Stop

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Checks and maintenance

See other generations:
Video tutorial

The start & stop function is annoying for many drivers: here are three methods to disable it permanently. The simplest method is to locate the sensor, which is found on the negative terminal of the battery.

Simply disconnect it and secure it to one side without damaging it. A warning light will remain on, but the system will no longer activate. In cars that have the sensor in the bonnet (usually French brands), locate the closure sensor inside the bonnet (usually near the front grille); disconnect the electrical plug; the system will think the bonnet is open and disable start & stop.

Again, a warning light will appear on the dashboard. An advanced method involves using an OBD2 tool and specific software.

Connect the tool to the EOBD port, turn on the ignition, access the ECU/Start&Stop menu, disable it; save the changes and restart the car. No warning lights will appear, but you must have the OBD2 tool and the software.


Posted on 22 March 2026 by ScegliAuto


Related tutorials

How to Permanently Disable the Start/Stop System in Dacia Sandero
How to Permanently Disable the Start/Stop System in Dacia Sandero
Dacia Sandero (2012-2020 / B8) To permanently disable the Start/Stop system on a Dacia Sandero, you need to work in the engine bay. Open the bonnet and locate the IBS sensor connec…
How to deactivate the Start & Stop system on the Dacia Sandero Stepway
How to deactivate the Start & Stop system on the Dacia Sandero Stepway
Dacia Sandero (2021-2026 / MK 3) In this video we can see how to permanently deactivate the start & stop system on the Dacia Sandero Stepway. If we wanted to deactivate it only for t…
How to Disable the Start/Stop Function in a Dacia Sandero
How to Disable the Start/Stop Function in a Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) On the Dacia Sandero 2024, the Start/Stop function can be disabled either temporarily or permanently. For the first procedure: with the engine runnin…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos