Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2012 Dacia Sandero?

Model: Dacia Sandero BS - Years 2008-2012
Part: Service warning light

This video shows how to reset the service light on a Dacia Sandero and is applicable to cars produced until 2015. The procedure should only be performed after servicing and changing the engine oil. Turn the key to the on position and then press the accelerator pedal. Keep it pressed and simultaneously press and release the brake pedal three times. Try to execute this quickly as the entire procedure should not take more than 10 seconds for it to be effective. By doing this, the light resets and you can turn off the ignition.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…
How to reset the service light of the Dacia Sandero
How to reset the service light of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) Below you will find the description of all the various steps you need to follow if you want to manually reset the service light of your Dacia Sandero…
How do you reset the Service light on the Dacia Sandero?
How do you reset the Service light on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the Service light of the Dacia Sandero, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: …

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - What does the "Service" warning light on a Dacia Sandero Stepway mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos